The logic circuit where state of digital signal is no change

Fibre-optic cables use

A character generator ROM is used in conjunction with

Basic air data instrument are

The process of sampling approximating an analogue signal to a series of
discrete levels is referred to as

The RESET Signal of the bistable

EICAS warning message

Max BST rate speed of ARINC 429

For aligning connector in fiber optics

CRT scan beam of electron

Factors to be considered in ESDS device handling

Decimal 65,535 to hexadecimal

Weather radar uses

Logic device that produce a binary code test indicates value of the most
logic received one of its

Electronic device most prone to damage from ESD

Lodable software a/c parts target hardware

CRT advantages over Led

Fiber optic over copper cable

Pilot gets an oral warning when the a/c reads decision height

The advantage of DRAM & SRAM is ?

All flight information such as flight direction, deviation points , active flight
path lines ?

GPS provides highly accurate navigation information system is based on?

The combination of three different colours are associated with?

Field loaded software (FLS) aircraft parts ?

Which computer bus is provide timing & control signals through-out the
system ?

Nibble are sometimes refered as ?

The potential at grid of CRT is ?

A level–C software classification is one which failure could result in

Essential requirements for connectors used with

Sources of EMI

Data is converted from serial to parallel and parallel to serial by means of

A memory device in which any item of data can be retrieved with equal
ease is known as

Gates will only produce a logic 1 output when all input are simultaneously
at logic 0

Adjacent green and red phosphorus are illuminated on the screen of a CRT. The resulting color will be

An EADI display of flight director commands are coloured

The logic circuit where state of digital signal is no change

A beam of light is directed from air to water

Fibre-optic cables use

The critical level of software level C

Arinc 429