Three bladed propeller storage

De-icing goes to slinger-ring through

Aerodynamic twisting force

Centrifugal twisting force

The purpose of drain hole in wooden propeller at tipping

Physical force that tends to throw the propeller blade away from hub when propeller under constant speed

Anti icing is done during

The cyclic times in electrical deicing s/s is heating circuits

Wooden propeller are constructed of

Blade angle is

Cyclic timer controlled by

Synchrophasing Is done for

To maintain the propeller RPM which is used

If prop not used for more than 3 months

Electrical motor sync uses

Cyclic time is used in anti-icing

Aerodynamic twisting force will cause the blade to move

Torque bending force will cause the blade to move in

When storing propeller installed with rubber boots

De-icing system consist of

The flyweight are mounted on

MTCS

Due to ice formation on propeller blade the blade produces

Propeller converts

In low pitch mechanism

The force that tends to pull the propeller blades out of the hub

Position of wooden propeller during storage

Visually inspect the propeller for

Electrical de- icing converts

In deicer boots

Greasing of propeller are specifically

Forces acting on a propeller are